The Pelco IXP31 Sarix 3 MP H.264 Indoor Day/Night Fixed Box IP Camera with Auto Back Focus comes
equipped with a 1/3" CMOS sensor that capture clear images up to
resolution of 3 MP. The box camera features an auto back focus (ABF)
mechanism to accommodate standard CS-mount MP lenses for wide-angle or
long-range surveillance needs. Additionally, the Sarix IXP camera
features advanced color science and a mechanical IR cut filter for
increased sensitivity in low-light installations.
The camera
supports up to two simultaneous video streams and a third service
stream. The two streams can be compressed with efficient H.264 high or
main profiles or MJPEG formats. The streams can be configured to a
variety of frame rates and variable bit rates to optimize image quality
with bandwidth and storage efficiency.
The camera features onboard
edge storage to a microSD card (not included). Video clips of varying
lengths can be stored to the card upon alarm, or video can be written
continuously to the SD card in the case of network outage. Video can be
retrieved from the card through the FTP protocol, and the solution will
support ONVIF Profile G in the future for integration with video
management systems.
The camera incorporates a simple motion
detection algorithm, allowing the camera to record or send an alarm when
there is motion in a selected zone or within the entire scene. A camera
sabotage alarm is triggered if the lens is obstructed or when the
camera is repositioned.
The camera seamlessly connects to Pelco
video management systems such as Endura version 2.0 (or later) and
Digital Sentry version 7.3 (or later). The camera integrates with major
third-party video management systems through the Pelco API and other
third-party software and systems through the open ONVIF Profile S
standard.
The camera deploys a standard web browser interface for
easy remote setup and administration. Controls are optimized for
convenient one-step camera configuration for features including color,
exposure, flicker control, and streaming. A one-click shutter allows you
to capture sharp JPEG snapshots of the live view for documenting,
positioning, or easy event recording.
