The light gray Sarix IMP Series IMP219-1EP 2MP Environmental Day/Night Pendant Mount Mini Dome IP Camera from Pelco features a 3 to 9mm remote-zoom autofocus lens for wide-angle or long-range surveillance needs. Autofocus capability ensures that the camera can be automatically refocused when needed. The camera features advanced color accuracy and a mechanical IR-cut filter for increased sensitivity in low-light installations.This Sarix Professional range camera supports up to two simultaneous video streams and a third service stream. The two streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and variable bit rates to optimize image quality with bandwidth and storage efficiency.The simple motion detection algorithm allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. The camera uses a standard Web browser interface for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming. The inclusion of a microSD card slot allows for recording video clips of varying lengths to be stored on the memory card (not included) upon alarm, or video can be written continuously to the microSD card in case of network outage. Video can be retrieved from the card through the FTP protocol.The mini dome IP camera can seamlessly connect to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). In addition, it can integrate with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S standard.2MP resolutionUp to 30 images per second (ips) at 1920 x 1080Autofocus motorized remote zoom lensAccessible edge storage with microSD cardMotion detection and camera sabotage detectionOperating temperature from 14 to 122°F (-10 to 50°C)Power over Ethernet (PoE) and 24VAC power inputCompatible with Pelco and third-party video systems1.5" NPT thread for use with Pelco wall mounts (not included)IP66 ingress protectionIK10 (20J) impact resistanceEasy to installONVIF Profile S and Profile G conformantLight gray, RAL 7047 finish with satin texture